7
TOOLS REQUIRED:
2- 10mm Wrench
PARTS REQUIRED:
2 - (P15) Linkage
2 - (H14) Bushing
2 - (H13) M6 X 90mm Bolt
2 - (H11) M6 Nut
7.
Attach Linkages (P15) to T-Legs as shown in
Details F &
Details G
. Pivot T-Legs
up
from the table and pivot linkage
(P15) up and align hole in Linkage with hole in T-Leg. Attach
Detail G
Detail F
H13
H13
H14
H11
P15
P15
H14
H11
Linkage (P15) to the
inside
face of T-Legs using Bolt (H13), Bushing
(H14) and Locknut (H11). Bushing (H14) goes between Linkage and Leg.
Attach other Linkage to T-Leg the same way. Tighten nuts securely but
do not
over-tighten
this is a pivot point.
Attach Linkage (P15) to the
inside
face of T-Legs.
Note:
P15
P15
