Instruction manual
10
•
Select your country code, enter the cell phone number and tap
“Get” to get a message containing the verification code.
•
Enter the verification code in the message and tap “Log in” to log
in to the App.
•
Click "Add Device" to add a new device.
•
Select the device you wanted to connect.
•
Follow the instructions on the app to connect the dehumidifier.
•
To control your device with voice using a smart speaker please
refer to the manufacturer's instructions on how to enable a skill
through your device.
EMPTY THE WATER TANK
•
When the drainage tank is full, the tank full indicator light will turn
on, the operation will stop automatically and the buzzer will beep
15 times.
•
Gently press on the sides of the tank and pull the tank out with
both hands.
•
Empty the water tank above a sink.
•
Do not remove the float from the water tank, otherwise the water
sensor cannot detect the water level, causing the unit to
malfunction.
•
If the tank is dirty, use water for cleaning. Do not use gasoline or
other chemicals, because it may damage the water tank and
cause water leakage.
•
Press the tank tightly with both hands to put it into place.
•
If the water tank is not positioned correctly, the full water sensor
will remain active and the dehumidifier will not work.
CONTINUOUS WATER DRAINAGE
•
The unit features a continuous drainage port. Using a plastic pipe
(with an inner diameter of 10mm). Take out the water tank and
put the drainpipe over the water outlet of the unit. Put the water
tank back in place and guide the drainpipe through the hole of the
water tank. The water in the drainage tank can be continuously
drained out from the continuous port on the unit.
Summary of Contents for 01.368020.01.001
Page 13: ......
