16
EN
- Open the cover (23).
- Fill the coffee bean compartment (13)
completely with coffee beans.
- Close the cover (23).
- Set the ground coffee fineness. Refer to
the section ”Setting the ground coffee
fineness”.
- Press the release button (12) to open
the filter holder assembly (11).
- Place a suitable coffee filter in the coffee
filter holder (10).
- Close the filter holder assembly (11) until
the release button (12) clicks into place.
Note:
The appliance can only be used when
the display is activated. If the display is not
activated, press any button to activate the
display. The appliance is ready for use.
- Set the coffee quantity. Refer to the
section ”Setting the coffee quantity”.
- Set the coffee strength. Refer to the
section ”Setting the coffee strength”.
- Place the coffee pot (16) on the heating
plate (18).
Switch on the appliance using the on/off
•
button (1). The on/off indicator (1) comes
on. After a few seconds, the appliance starts
grinding the coffee beans and making the
coffee.
To interrupt the process, press the on/off
•
button (1).
If the process is completed, the appliance
•
will beep and switch to keep-warm mode
(C). The appliance can be switched off
using the on/off button (1) or the appliance
switches off automatically after 2 hours.
Allow the appliance to cool down completely.
•
Making coffee with ground coffee
(fig. A, B, C, D & G)
Before you proceed, we would like you to
focus your attention on the following notes:
- Only use ground coffee that is suitable for
the appliance.
- Only use paper coffee filters (1x4) that are
suitable for the appliance.
Fill the water reservoir (14) with the
•
required amount of water.
Do not fill the water reservoir with more
•
water than required for making the coffee.
Only use the amount of water required for
making the coffee. The appliance
automatically stops when the water
reservoir is empty.
To use ground coffee, take the following
•
actions:
- Press the release button (12) to open
the filter holder assembly (11).
- Place a suitable coffee filter in the coffee
filter holder (10).
- Put the required amount of coffee in the
coffee filter.
- Close the filter holder assembly (11) until
the release button (12) clicks into place.
- Place the coffee pot (16) on the heating
plate (18).
Note:
The appliance can only be used when
the display is activated. If the display is not
activated, press any button to activate the
display. The appliance is ready for use.
Press the grinding function on/off button
•
(2) to switch off the grinding function. The
grinding function on/off indicator (2)
comes on.
Switch on the appliance using the on/off
•
button (1). The on/off indicator (1) comes
on. The appliance starts making the coffee.
To interrupt the process, press the on/off
•
button (1).
If the process is completed, the appliance
•
will beep and switch to keep-warm mode
(C). The appliance can be switched off using
the on/off button (1) or the appliance
switches off automatically after 2 hours.
Allow the appliance to cool down
•
completely.
Delay start function (fig. B & C)
The appliance has a delay start function which
makes it possible to program the time for
starting the coffee-making process.
Note:
The appliance can only be used when
the display is activated. If the display is not
activated, press any button to activate the
display. The appliance is ready for use.
Summary of Contents for 249401
