GTIB-30 Installation Manual-UL
52
4411-0011, Rev 2.0
The polarity of the input is not important. Maximum current drawn by each input at
24V is 60mA while the expected current consumption is below 20mA.
The digital input parameters of the optional GTIB-30 Client I/O device are
summarized in Table 8.
Table 8: Digital Input parameters of GTIB-30 Client I/O device.
Input High
24V
Input Low
0V
Maximum current drawn (at 24V)
60mA
Expected current drawn (at 24V)
<20mA
Polarity
Either
The input signals must be wired as indicated in the digital input connectors on the
optional GTIB-30 Client I/O device. Refer to Figure 30 for connector locations, Table 9
for connector descriptions, and to Figure 31 for the connector pin out diagram.
Table 9: Digital input connectors on optional GTIB-30 Client I/O device.
Description
Connector
Digital input assigned to digital output 1 IO1
Digital input assigned to digital output 2 IO2
Digital input assigned to digital output 3 IO3
The pinouts for these three connectors are identical and are shown in Figure 31.
INP
U
T
INP
U
T
NC
C
O
M
M
ON
NO
1 2 3 4 5
Figure 31: Digital input connector pin outs
Please contact PPS for assistance in configuring specific functions for these digital
inputs.
Pin 1 Input
Pin 2 Input
Pin 3 NC
Pin 4 Common
Pin 5 NC
Summary of Contents for GTIB-30
