© 2017 Printek LLC 3515 Lakeshore Drive, St. Joseph, MI 49085 PH:269-925-3200
www.printek.com | E: info@printek.com
Control Panel indicators
Function:
How to:
Power & Status
(Green/Red)
Battery
(Yellow)
Alert
(Red)
Indication
Power Button
Power up
Power down
Toggle IP over
USB on/off
Press & Release
Press & Hold
Press Twice
On
Off
On
Booting up
On
Off
Off
Ready
On
Off
Flashing
Paper Error/Lid Open
Paper feed button
Advance paper
Print setup
report
Press once
Press twice
Flashing
Off
Off
Job is arriving
Flashing
Off
Off
Job is printing
Flashing
Off
Flashing
IP over USB active
Solid, Flashes Off
Every 2 Seconds
Off
Off
Wireless Personal
Area Network active
Solid
Charging Battery
Flashing
Battery Low
Self-Test / Configuration print out
With power on, press the paper feed button twice quickly.
USB Access to Printer Web Pages
1.
Turn the printer ON.
2.
Connect a USB cable between the printer and a PC.
3.
To access the FP-541 web page, push the Power button twice rapidly. This will put the printer into Configuration mode.
4.
When the printer is in Configuration mode the POWER and FAULT LEDs will flash together.
a.
Open browser on your PC and type
169.254.200.1
into the address bar of the browser and hit Enter - A login box should appear:
b.
Type “0000” and hit Enter- you should now be at the home page for FP-541 Configuration.
5.
To return the printer to normal operating mode, double click the POWER button. The Power LED will be returned to a solid light.
FP-541 Quick Start Guide
Once the printer is connected via USB and in
IP over USB
mode it is temporarily not possible to access the Internet.
