2
Fo
rm
s
Defines Each Form’s Configuration
FORMS
8000se Series
FormsMaster
*Factory Default Setting
Forms Setup
allows you to
set print
parameters for
each of the 10
form templates
0 - 9
Functions
Possible Values
Description
Form # or Name:
0 - 9, A - Z, or spaces
Allows you to select the desired form to be configured.
Printer defaults to the currently selected form .
Name Path:
Front, Center, Rear, Rear,
Front+Rear
Assigns tractor path to be used for current form (Available
on FormsMaster 8003se only).
Auto. Cut:
Yes or No*
Available only when the optional FormsCutter is installed.
Will cut every form printed.
Cut Adj:
Auto, -0.2951"…0*…+0.2951", Auto
Available only when the optional FormsCutter is installed.
LPI:
6*, 8
Sets line pitch to 6 or 8 lines-per-inch.
Length:
1 through 227 (66*)
Sets form length in lines at current line pitc h.
Top Mar:
0* through 226
Sets top margin by adding specified number of lines t o top
of form.
Bottom Mar:
0* through 226
Sets bottom margin in lines from bot tom of form.
Characters Per Inch:
10*, 12, 13.3, 15, 16.74, 17.14, or 20
Sets character pitch in characters-per-inch.
Left Mar:
0* through 268
Sets left margin in columns (charact ers) from left-most print
position. Column width based on CPI. Left margin m ust be
less than right margin.
Right Mar:
4 through 272*
Sets right margin in columns (characters ) from the left-most
position. A value of 272* sets margin to the right-m ost
position.
Font:
Epson FX FD*, DF, LQ
PC English FD, DF, LQ
PC Latin 2 FD, DF, LQ
DEC LA 120/210 FD, DF, LQ
EBCDIC FD, DF, LQ
OCRA-A OQ
OCR-B OQ
Roman-8 FD, DF, LQ
ML Euro (858) FD, DF, LQ
ML (850) FD, DF, LQ
Selects font to be used. (NOTE: Fonts not ins talled will not
be displayed).
Draft:
Normal* or Fast
Selects the mode or quality of printing, either "Norm al" or
"Fast".
Impact:
Normal* or High
Set Character printing mode to normal or high impact .
Lang:
USA*, France, Germany, England,
Denmark, Sweden, Italy, Spain,
Japan, or Finland
Sets character substitution table for alternat e language.
(NOTE: Epson font must be selected for charac ter
substitution).
Zero:
Normal* or Slashed
Sets type of zero to be printed.
Unidir:
Yes or No*
Sets uni-directional printing instead of bi-directional printing.
