7
www.printek.com
| P: 888.211.3400 | F: 269.925.8539 | E:
info@printek.com
End-of-Page Control: (Default = Windows Paginated
)
Values: Form Feed, Contigous, Feed 1 inch, Windows Paginated
Form Feed
– when using a roll with black marks, the printer will advance paper to the black
mark after page has completed printing.*
Contigous
– printer will not advance paper after page is printed.
Feed 1 inch
– when using a roll with black marks, the printer will advance paper 1 inch pass
the black mark after page has completed printing.*
Windows Paginated
– printer will advance paper according to the paper size selected in the
Paper Size setting.
*
Top-of-Form setting can be used to further align the paper to the tear bar when using black
mark sensing.
End-of-Job Control: (Default = No Form Feed
)
Values: Form Feed, No Form Feed, Feed 1 inch
Form Feed
– when using a roll with black marks, the printer will advance paper to the black
mark after the print job has completed printing.
No Form Feed
– printer will not advance paper after the print job is completed.
Feed 1 inch
– when using a roll with black marks, the printer will advance paper 1 inch past
the black mark after the print job has completed printing.
Print Speed: (Default = 2.00 inches per second
)
Values: 2.00 inches per second to Plot Mode.
Adjusts the speed paper advances through the printer.
B. Black Mark Operation
To use the Black Mark Sensing you will need to set the Advance Options in the Windows driver to
Form Feed at the end of each page:
1. Right click on the printer icon in your Devices and Printers folder
2. Select Printer Properties
3. Select the General tab
4. Select Preferences
5. Select Advanced
6. Change the End of Page Control to Form Feed
If using media with an appropriate black mark indicator, printer will now automatically advance paper
to the next black mark when it finishes a printjob.
