9
Initial Power Up And Self-Test
Once the Battery is charged and the paper is loaded perform an initial power up
self-test.
Note:
The self-test feature only functions if printer is in the
manual power off mode (factory default). See “Dipswitch
settings”
1.
To start the self-test, press and hold the FEED button, then press
ON . The printer will start printing the self-test messages.
2.
Press the OFF or FEED to stop or cancel the self-test print.
The first few lines of self-test show the printer firmware version, the current
printer settings and a list of any optional or special features installed.
Also
sample demo lines are printed using the internal resident printer fonts.
