Printronix Network Interface Card User Manual Download | Manualshive

Page: 161 / 378

background image

NetWare Version 3.x RPRINTER Setup

161

2.

Store the RPRINTER settings on the NIC. This will refer to an
existing PSERVER.NLM on the file server or to one that you
will create later in these steps.

Syntax:

store rprinter add

PSERVERname printernumber

NICdestination

An example for an RPRINTER servicing printer

0

of the

PSERVER.NLM called

pserver1

and sending jobs to the

NIC destination

d1prn

is:

store rprinter add pserver1 0 d1prn

3.

Leave this NIC login session and log on to the NetWare 3.

x

file

server as “Supervisor.”

4.

Load a PSERVER.NLM if one is not already loaded. This will
be the PSERVER that the NIC services as an RPRINTER, so it
must match the PSERVER name given in step 2.

5.

Enter PCONSOLE.

6.

Select

Print Queue Information

from the PCONSOLE Main

Menu.

7.

Click

Insert

to add a new queue to the list of currently defined

queues.

8.

Type in the name of this new queue when prompted, and press
ENTER. This can be any name you would like.

9.

Click

Escape

to return to the Main Menu.

10. Select

Print Server Information

and press ENTER.

11. Click

Insert

when the list of existing print servers displays.

12. Select the print server that you want the NIC to service as an

RPRINTER. This is the PSERVER.NLM loaded in step 4.

13. Select

Print Server Configuration

from the menu that

displays.

14. Select

Printer Configuration

from the next menu to display a

list of configured printers.

15. Select an item from the list (e.g., an existing printer name or

“Not Installed”) to display the printer configuration window.

«
...
159
160
161
162
163
...
»

Summary of Contents for Network Interface Card



























































































































































































































































































































































































Reviews:

No comments

Related manuals for Network Interface Card

Brand: D-Link Pages: 14

Brand: D-Link Pages: 7

Brand: D-Link Pages: 41

Verizon DSL-2750B

Brand: D-Link Pages: 2

Brand: D-Link Pages: 4

8 Port 10/100Mbit/s Ethernet Smart Switch with Fibre Uplink

Brand: Tyco Electronics Pages: 18

Power Xpert Meter 2000

Brand: Eaton Pages: 16

POW-R-COMMAND 1000

Brand: Eaton Pages: 84

Brand: Patton electronics Pages: 51

Brand: N-Tron Pages: 62

8677 - BladeCenter Rack-mountable - Power...

Brand: IBM Pages: 126

Brand: Vivotek Pages: 136

Marconi OMS 1200

Brand: Ericsson Pages: 136

RP614 - Web Safe Router

Brand: NETGEAR Pages: 16

Brand: Idis Pages: 17

IGS-5225-20T4C2X

Brand: Planet Pages: 16

Brand: iGateWeb.com Pages: 6

Brand: Axis Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands