280420 FGA-330
- Owner’s Manual
Rev: 11/18/12
Page: 9
Assembly Instructions:
6. Open legs fully as shown in Figure 10. Make sure that leg locking knob inserts flush against the base as-
sembly and legs will no longer moves freely as shown in Figure 11. The legs will then only operate by the
use of the foot pedal located at the rear of the base as shown in Figure 12.
7. Release carry bar from retaining cradle as shown in Figure 13, and 14. Unlock the rear casters.
Figure 10
Figure 13
Leg locking knob flush
with the base assembly
when the legs are fully
opened.
Figure 11
Figure 14
Figure 12
