280420 FGA-330
- Owner’s Manual
Rev: 11/18/12
Page: 11
Assembly Instructions:
9. Remove the middle screw from the mounting bracket using 3 mm Allan Key as shown in Figure 18.
10. Press the FGA-330 CBJ Care Control Box against the mounting bracket and slide it down. The control
box should be seated securely on top of the edge of bracket as shown in Figure 19.
11. Mount the Control Box to the mounting bracket using same screw that you removed from the middle of the
bracket as shown in Figure 20.
12. To install the battery, you will need to press the battery against the bracket and slide it down until it sits
straight on top of the control box as shown in Figure 21. Make sure to secure the battery box by latching
the battery lock into the bracket as shown in Figure 22.
Figure 18
Figure 19
Figure 20
Figure 21
Figure 22
Figure 22
