280490 FGSH-450
- Owner’s Manual
Rev: 03/25/13
Page: 7
Assembly Instructions:
BASE, MAST, and BOOM ASSEMBLY:
1. Lift the FGSH-450 Base assembly carefully from the carton and place on the floor as shown in Figure 1.
Lock the rear casters. Remove the mast locking screw from the base assembly as shown in Figure 2.
2. The Bottom of mast assembly have a notch (Figure 3), and match these notch at the bottom of mast assem-
bly with the tabs inside the tube of base assembly (Figure 4) as shown in Figure 5.
3. Insert the mast assembly into the tube of base assembly and onto the TABS.
Caution: Lift parts are heavy, and will need to be lifted with care.
Heavier items may need two people for assembly.
Figure 3
Figure 1
Figure 2
Mast Locking Screw
Figure 4
Figure 5
Caution: Possible finger trap. Keep fingers away from the end of the mast when inserting
into the base tube. Heavier items may need two people for assembly.
Bottom of Mast Notch
TABS
Figure 4
