999548 – Revision B
P a g e
|
8 of 20
Final Inspection
Before first operation of the FSG440:
•
Confirm at the FSG is level.
•
Ensure that the safety pins are installed in both support posts.
•
Ensure that all fixing point are all tight and no parts are broken or bent.
•
The feet are located on a stable, level surface.
•
Make sure that the trolley moves easily from one end of the track to the other.
•
Ensure that the adjustable track is located at the correct length.
•
Ensure that attachment procedure of their portable hoist is carried out correctly, in accordance with manufactures
installation instructions.
Prior to each lift, this will be completed by the user, the FSG440 and associated hoist, accessories and sling(s), must
be visually inspected. Refer to the hoist, accessory and sling user guides for specific details regarding their
inspection.
Prior to mounting the portable lift onto the trolley of the FSG440, please read the owner’s manual of the portable
lift. Be sure that the instructions on the use of the lift and any accessories, such as slings are thoroughly understood
before attempting to use them with the FSG440.
Failure to comply with this may result in injury to the individual being lifted and/or the caregiver or damage to the lift and/or the
FSG440.
Following the instructions for the portable lift, attach the carabiner, (or other similar attaching device) located at the end of the
lift strap. Be sure that the carabiner is securely attached to the trolley prior to proceeding with the transfer.
Proceed to transfer the individual in the manner described in the owner’s manual for the portable lift and sling. When the
transfer is completed the lift may be removed from the trolley.
Figure 3
