999548 – Revision B
P a g e
|
12 of 20
8.2
Inspection
Inspection is to be completed prior to each use by the user of the Gantry.
Should any of the components in the table below fail the inspection, DO NOT use gantry.
Contact your local authorized dealer for service – contact details are on the last page of this manual.
Ensure all component inspections in the Table below are completed prior to each use of the Hoist.
Check List before Use
Component
Service/Inspection required
Generic
Visual inspection of the external of the Gantry. Significant damage that may affect
the function of the Gantry along with a clear safety hazard is unacceptable.
Check the Labelling on the Gantry to ensure they are all still legible, this includes
the Serial Number and other important markings. If labels are not legible, then
contact your local authorised dealer immediately.
Check all main nuts and bolts to see if they are loose, If they are not tight or you
have concerns, then contact your local authorised dealer immediately.
Certification
An authorised/competent service company or person will issue a test certificate
after satisfactory completion of the LOLER inspection. The certificate will be valid
for 6 months.
Telescopic track
Check the smooth opening and closing of the track.
Telescopic legs
Ensure the telescopic legs are fully engages into each foot
Track
Check the attachment of the track to the Legs, ensure all fixing points are secure
and free from wear.
Trolley
Check the trolley rotates and traverses freely. Check the central pivot bolt and
nylon lock nut for excessive wear. Check the fixing point for excessive wear and
inspect the hooks for any damage, sharp edges and excessive wear.
8.3
Cleaning
Please follow the cleaning guidelines below on cleaning and disinfecting the Gantry.
General cleaning
It is recommended to clean the FSG440 and accessories before the use by a different patient, reducing the risk of
cross–contamination.
The exterior of the FSG440 can be cleaned using a damp soapy cloth for general cleaning duties. Please ensure the cloth is damp
and not wet. Ensure the exterior of the device is dry after cleaning. Dry using a clean dry cloth.
Table 8
