10
Prisma Light | prismatibro.se
GATEWAY INSTALLATION
Light cabinet
The gateway should be installed within 30 meters from the closest
Detect-luminaire.
The gateway will communicate wirelessly with the luminaries.
The installation should be done by the manufactorer or
by someone
educated by the manufactorer.
* The installer should contact the producer of the light cabinet
to get
the correct instruction about making holes in the light cabinet.
1
Drill a hole for the power cable, Ø 20 mm*
2
Rubber gasket:
Add the rubber gasket to the backside of the Gateway.
3
Connect the power cable to the backside of the Gateway:
Press down the coupling ring, and keep turning the ring
(clock wise) until you feel a
”click”. Now the connector
is locked.
4
Mount the Gateway to
the light cabinet - use
the supplied screws.
1
4
3
2
