button immediately.
• Do not seal twice in the same place, since this may cause the bag to burn.
• If the machine becomes overloaded, the overheating protection will switch the machine off. It
this happens, disconnect the machine from the power supply and leave it to cool for about 25
minutes.
HOW TO USE THE PULSE VACUUM BUTTON (PULSE)
With the pulse function, you can decide the strength of vacuum by pressing the PULSE button,
step by step. Soft food does not require the same strength of vacuum as solid food. When the
desired vacuum is reached, press the SEAL button.
HOW TO USE THE VACUUM SEALER WITH A CANISTER
NOTE:
Canister and hose is not included.
1. Wipe the canister cover and canister base and ensure they are clean and dry.
2. Place food into canister and leave at least one inch of space between food and cover.
3. Place cover onto canister and insert one end of hose into vacuum port on machine. Place the
other end onto canister port, pressing down firmly to ensure a tight fit.
4. Press the lid closed at the right and left sides with palms (confirmed by an audible click).
5. To begin the vacuum process, press the VACUUM button. The unit will continue to vacuum and
then seal once air has been removed.
6. Once the vacuum indicator light has turned off, it is safe to remove hose from machine and
canister.
CARE & CLEANING
• Always unplug the unit before cleaning.
• Do not immerse in water.
• Do not use abrasives to clean the unit.
• Wipe the outer surface with a soft, damp cloth and soapy water.
• To clean the inside of the unit, wipe away any food or liquid with a paper towel.
• Dry all parts thoroughly before you plug in and operate the unit again.
• Vacuum chamber may trap liquids that were drawn from the bag; use a mild dish soap and
a warm, damp cloth to wipe away any left behind liquid from the vacuum chamber. Dry
thoroughly.
• Keep the lid of the machine unlocked when not in use.
TROUBLESHOOTING
Nothing happens when I press the ’’VACUUM’’ button:
• Make sure the power cord is correctly plugged into the electrical outlet.
• Make sure the power cord is not damaged in any way.
• Make sure the electrical outlet is operative by plugging in another appliance. If it’s not, please
check the circuit breakers or fuses in your home.
• Make sure the bag is positioned correctly down in the vacuum chamber.
• Press down on both sides of the lid and make sure it is locked in place.
• Wait 25 minutes to allow the machine to cool off, and then try using again.
The air is not being vacuumed from the bag:
• Check that there are no gaps, folds, wrinkles or holes in the pre-sealed bags.
• Check for loose, worn or cracked upper and lower sealing gaskets.
10
Summary of Contents for HPRV100
Page 1: ...HPRV100 USER MANUAL VACUUM SEALER...
Page 2: ...Hydrofarm com 2...
