Care and maintenance
Page GB-19
(15)
(14)
(13)
5. Once the grease filter (15) is fully dry, in-
sert it with the pins into the openings.
6. Push the lock (14) up; snap the grease
filter (15) in and release the lock.
7. Close the cover (13) again and allow it to
click into place.
8. Switch the power back on.
Inserting/replacing activated
charcoal filters
Activated charcoal filters are required for
circulation air operation. They help com-
bat odours. They have to be replaced
as soon as the cooking odours can
no longer be adequately filtered.
If used frequently, you should change the fil-
ters regularly. Check at least every 6 months
For the source of supply, please see chapter
„Our Service Centre“ on page GB-22.
1. Unplug the mains plug or switch off the
corresponding circuit.
(13)
(14)
(15)
2. Flip the cover (13) up.
3. Open the lock (14) on the grease fil-
ter (15) and carefully pull the grease filter
downwards to remove it.
4. Only when replacing:
The two charcoal filters (16) are located
to the right and left of the motor (17).
Loosen the two charcoal filters and re-
move them.
196374_GB_20180516.indd GB-19
196374_GB_20180516.indd GB-19
17.05.2018 14:13:14
17.05.2018 14:13:14