V6402, V6404, V6406,V6408
and V6418 HD converters
26
Issue 6
3.1.3
Menu Control
The
Select,
▲
and
▼
buttons are used to manoeuvre around the menu system. The menu structure has
five levels and the
Select
button is used to go up and down the structure. The
▲
and
▼
buttons are used
to move between selections or to adjust a parameter depending on which sort of menu is displayed. The
five levels are as follows:
Sleep
Display is blank (except for Banner warnings).
Top Level
As above, e.g.
V6402FD
Main Menu
The Main menu items, such as
VIDEO
,
STATUS
,
ENG’ING
etc. These
items are all in Upper Case.
Sub Menu
Menu items under each main heading, such as
Source
or
A/R
under the
VIDEO
main menu. These items are all in Sentence Case (generally
lower case but with upper case first letters).
Parameter
The lowest level under the Sub Menu, and used to actually adjust a
parameter. The display will depend on the actual parameter and may be
a value such as
+0.00dB
for a gain or
ON
or
OFF
for a switch variable.
There is usually a title to describe the variable and a small icon in the left
hand character position, but 8 characters cannot provide for a detailed
description.
To move down a level just press the
Select
button briefly; then press either the
Select
button again to go
down another level or the
▲
and
▼
buttons to move around the options within a level.
To move up a level press and hold the
Select
button for about half a second which will move up one level.
If you continue to hold the
Select
button then it will move up a level every half a second until it reaches
the Sleep level (one above the Top Level).
A complete list of all the menus is given in Section 5.
