19
Momentum mo8me Manual
Opening Screen
Screen Item
Description
Connecting to Addr: X
Displays the mo8me address to which the Tweak is connection
Status: Failed
This indicates one of two things:
1. The mo8me is not powered up
2. The connecting mo8me address is incorrect
(See the New Unit screen to reset the mo8me address, page 22 )
Press any key to continue
Pressing any key will take unit to the Communication Time Out
screen (See page 20)
Powering Up
The Tweak: Overview and Setup
Chapter4
First Power Up
The Tweak is powered by 3 AAA batteries inserted at the back of the unit.
•
Push down and turn the back panel to remove it.
•
The Tweak will power up when batteries are inserted.
•
The unit will default to a Network address of 1.
•
When not in use, the unit automatically times out.
•
Press any button to resume.
•
It will resume to the last screen in use before time out.
•
After powering up for the fi rst time, please take the following steps:
(If these steps are missed, the Tweak will be unable to set routing or any of the other
mixing capabilities.)
The unit is shipped with a factory default Network address of 1, which may not correspond
•
with your mo8me address, especially if you already have a Network up and running. You
MUST reset the Tweak to the correct Network address. (See page 20 or 22)
Assign your Tweak a unique ID number. (See page 24 - Assigning Your Tweak an ID Number)
•
Note: After initial power up, and if the Tweak has been reset to the correct address, the Opening
and Communication Time Out Screens will automatically be skipped during the next power up. The
Tweak will then open to the last screen in use.