Pro Co Sound Momentum MO8ME Manual Download

Page: 27 / 34

Momentum mo8me Manual

The Tweak: Mixing

Chapter 5

Channel Mix Menus

Soft Button Description

Out X

X - Ch X

Output name

X - CH X describes input ch(1-16)

Vol

This mode allows user to adjust

individual volume levels

Pan

This mode allows user to pan left

or right when working with stereo

channels. If no stereo channels

have been assigned, Pan will not be

available.

Name

Allows master user to name

individual input channels

Solo

Allows user to listen only to the

channel selected SOLO

Mute

Mutes only the selected channel

Allows master user to adjust EQ

level of individual input channels

Prev/Next

Allows user to scroll input channels

Soft Button Description

Master

Brings user to Channel Mix Menu for input channels 1-16

Out X

Displays the name of the current selected output

Save

Allows user to save up to 16 different mixes

Recall

Used to recall a saved mix

Clr Mix

Clears all volume and pan adjustments from all channels on the current output

Clr EQ

Clears all EQ adjustments from all channels on the current output (Only master user

can clear the EQ)

These screens allow the user to fi ne tune mixes to meet their specifi c needs.

•

Pressing down on the encoder will return user to previous screens.

•

Only the master user (mix 1, mix 1 & 2, default mix setting ALL) can make changes to EQ and

•

channels names.

Mix 2-8 users will have ability to adjust volume, pan, solo and mute.

•

The on-screen dial illustrates adjustments as encoder is turned to desired level.

•

Channel Mix Menu will open with the Output Channel Master screen. Press the

•

PREV/

soft buttons to scroll input channels 1-16 and begin creating a mix.

Output Channel Master Screen

Input Channel Master Screen

Soft Button Description

Out X

Master

Output name

Vol

This mode allows user to adjust

overall volume levels

Pan

This mode allows user to pan left

or right when working with stereo

channels. If no stereo channels

have been assigned, Pan will not be

available.

Name

Allows master user to name

individual output channels

Mute

Mutes the entire output channel

Allows master user to adjust overall

EQ level of output channel

Prev/Next

Allows user to scroll input channels

Summary of Contents for Momentum MO8ME



































Search results

Summary of Contents for Momentum MO8ME

Reviews:

Related manuals for Momentum MO8ME

Brands by name

Popular brands

Pro Co Sound Momentum MO8ME, Manual

Search results

Summary of Contents for Momentum MO8ME

Reviews:

Related manuals for Momentum MO8ME

Brands by name

Popular brands