background image

6

 Momentum mo8me Manual

The Momentum network uses standard Gigabit Ethernet technology.  With using standard Ethernet 

technology, the Momentum system can be setup and controlled using standard Ethernet products.

Chapter 1

Overview

Momentum System

Features

The Momentum digital snake system by Pro Co is designed to replace traditional analog audio wiring 

anywhere audio distribution is needed. By capturing audio at the source, converting it to digital audio 

and distributing it over a standard Ethernet network, many of the diffi culties in executing the increasingly 

complicated audio systems of today can be simplifi ed. By reducing the amount of fi eld  terminations, 

installation becomes less time consuming. Texas Instrument, Burr Brown mic preamps and Cirrus Logic 

digital converters provide a platform that is as close to analog as possible without the inherent problems 

that are associated with traditional wiring. 

Flexibility and expandability are enhanced through the use of modules for inputs, outputs and DSPs. 

Signal routing becomes as easy as clicking a button. You can place inputs, outputs, DSPs and controls 

anywhere on the Momentum network. Also digital interfaces are available for seamless system integration 

into many of the popular formats.

Standard Gigabit Ethernet Protocol

• 

Power Over Ethernet (PoE) 802.3af Compliant

• 

Up to 256 total active system inputs

• 

0.630 ms A/A latency 48k sampling (no DSP)

• 

1.00 ms A/A latency 48k sampling (with DSP)

• 

Fiber optic option

• 

Firmware upgradable in the fi eld

• 

8 mono, 4 stereo or any combination of 

• 

output mixes
Allows 16 input channels from the network 

• 

for the output mixes
16 three band input EQ’s and 8 three band 

• 

output EQs

The “Tweak” wireless remote control allows 

• 

user to access all system mixing functions
48K sampling only

• 

Clip LED indicators for each output

• 

Front mounted control panel

• 

Available with rack mount kit or optional 

• 

stage boots
Onboard memory and programming

• 

Control via mrc, free pc software, 

• 

Crestron or AMX
Phoenix connector and DB25 options 

• 

available for permanent installations or 
easy passive splits

1

Summary of Contents for Momentum MO8ME



































Reviews: