Pro.rfz
Quick Reference Guide
WIRELESS RANGE EXTENDER
Safety Suggestions
Read and Follow Instructions.
Read all safety and operating instructions before
operating the unit.
Retain Instructions.
Keep the safety and operating instructions for future
reference.
Heed Warnings.
Adhere to all warnings on the unit and in the operating
instructions.
Heat.
Keep the unit away from heat sources such as radiators, heat registers,
stoves, etc., including amplifiers that produce heat.
Power Sources.
Use only power sources of the type described in the operating
instructions, or as marked on the unit.
Water and Moisture.
Do not use the unit near water—for example, near a sink,
in a wet basement, near a swimming pool, near an open window, etc.
Object and Liquid Entry.
Do not allow objects to fall or liquids to be spilled into
the enclosure through openings.
Servicing.
Do not attempt any service beyond that described in the operating
instructions. Refer all other service needs to qualified service personnel.
Damage Requiring Service.
The unit should be serviced by qualified service
personnel when:
Objects have fallen or liquid has been spilled into the unit.
The unit has been exposed to rain.
The unit does not appear to operate normally or exhibits a marked change
in performance.
The unit has been dropped or the enclosure has been damaged.
Limited Warranty
Pro Control warrants its products for a period of one (1) year (90 days only for
included battery packs); or for a period of time compliant with local laws when
applicable from the date of purchase from Pro Control or an authorized Pro
Control distributor.
This warranty may be enforced by the original purchaser and subsequent owners
during the warranty period, so long as the original dated sales receipt or other
proof of warranty coverage is presented when warranty service is required.
Except as specified below, this warranty covers all defects in material and
workmanship in this product. The following are not covered by the warranty:
Damage resulting from:
1.
Accident, misuse, abuse, or neglect.
2.
Failure to follow instructions contained in this Guide.
3.
Repair or attempted repair by anyone other than Remote Technologies
Incorporated.
4.
Failure to perform recommended periodic maintenance.
5.
Causes other than product defects, including lack of skill, competence or
experience of user.
6.
Shipment of this product (claims must be made to the carrier).
7.
Being altered or which the serial number has been defaced, modified or
removed.
71-500012-16 V1.0
Pro Control is a division of Remote Technologies Inc. For information on how to
become a trained and authorized Pro Control Dealer, access to the Pro Control
Studio programming software, product information and more, please visit our
web site at:
www.procontrol.com
For general information, you can contact Pro Control at:
Pro Control
5775 12th Ave. E Suite 180
Shakopee, MN 55379
Tel. (952) 224-5024
Fax (952) 253-3131
Sales
952-224-5010
Email: info@procontrol.com
Customer Service
952-224-5020
Email: service@procontrol.com
Technical Support
952-224-5024
Email: support@procontrol.com
Contacting Pro Control
If you are encountering any problems or have a question about your Pro Control
product, please contact Pro Control Technical Support for assistance.
Pro Control provides technical support by telephone, fax or e-mail. For the
highest quality service, please have the following information ready, or provide it
in your fax or e-mail.
• Your Name
• Company Name
• Telephone Number
• E-mail Address
• Product model and serial number (if applicable)
If you are having a problem with hardware, please note the equipment in your
system, a description of the problem, and any troubleshooting you have already
tried.
If you are having a problem with software, please note what version you have
installed, the operating system on your PC, a description of the problem, and
any troubleshooting you have already tried. If you are calling about a software
or programming question or problem, please be at you computer when you place
your call. This will considerably speed up the troubleshooting process.
Please do not return products to Pro Control without return
authorization.
Service & Support
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the device.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received including interference
that may cause undesired operation.
N27917
Federal Communications Commission Notice
Pro.rfz
WIRELESS RANGE EXTENDER
Get more control
®
P R O C O N T R O L
To make logo scale correctly
select the logo and go to:
Object>Transform>Scale>Option
s. Then check “Scale strokes and
effects” and click OK.
To make the logo permanently
scaleable on any computer select
the logo and go to:
Object>Expand. Check all avail-
able boxes and click OK.
Copyright © 2013 • Pro Control Incorporated • All rights reserved.
Extend the 2-way link between the ProLink.z processor and
Pro24.z remote, providing reliable control and feedback such
as song meta-data, volume level, lighting control and more.
Multiple modules can be added by simply powering them from an
electrical outlet. The Pro.rfz units will then create a self-healing
wireless network which instantly adapts to changes or problems
with the communication path. A detachable wall mount bracket
makes for a clean and easy installation.
Key Features
•
Extends the 2.4GHz ZigBee
®
wireless range of the ProLink.z
processor.
•
Wireless range between ProLink.z and Pro.rfz modules up to 70
feet.
•
Supports bi-directional communication, providing control and
feedback with the Pro24.z remote.
•
Adding Pro.rfz modules creates a self-healing wireless 2.4GHz
ZigBee RF network.
•
Configured via Pro Control Studio and a micro USB cable.
•
Durable plastic enclosure with integrated antenna.
•
6’ (2m) Power supply included.
•
Easy mounting with a detachable wall bracket.
Contains: FCC ID: MMURTI1300
Contains: IC (Canada): 3166A-RTI1300
