PG /
16
800.543.6618
USE PROPER EXTENSION CORD: Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole recep-
tacles that accept the lathe’s plug. Repair or replace damaged or worn cord immediately. Make sure your extension
cord is in good condition. When using an extension cord, be sure to use one that is 15’ or less and 14ga or heavier (i.e.
12ga). An undersized cord can cause a drop in line voltage resulting in a loss of power and overheating.
EYE SAFETY: Wear an approved safety face shield, goggles, or safety glasses. (Ordinary eyeglasses are not safety glasses
and do not provide the degree of protection necessary.)
RESPIRATORY SAFETY: If the operation or area is dusty a face or dust mask should be used.
PERSONAL PROTECTION: Before operating the machine, remove tie, rings,watches and other jewelry, and roll up sleeves
above the elbow. Remove all outer loose clothing and confine long hair. Protective type footwear must be worn. Hearing
protectors must be used where noise exceeds the level of exposure allowed in Section 1910.95 of the OSHA Regula-
tions. DO NOT WEAR GLOVES.
DO NOT USE LATHE IN DANGEROUS ENVIRONMENT: Don’t use the lathe in damp or wet locations, or expose the lathe to
rain. Keep the work area well lighted.
DO NOT OVERREACH: Maintain a balanced stance and keep your body under control at all times.
SAFETY INSTRUCTIONS (continued)
5.
6.
7.
8.
9.
10.
Summary of Contents for X9D
