INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL
& ELECTRONIC EQUIPMENT
When this product has reached the end of its life it must be treated as Waste Electrical & Electronics
Equipment (WEEE). Any WEEE marked products must not be mixed with general household waste,
but kept separate for the treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
Made in China. PR2 9PP
Man Ref 2.0
CLEANING & MAINTENANCE
•
This appliance consists of a robust and maintenance-free casing with a protective
cover. No user serviceable parts are inside.
•
Always unplug the heater from the mains supply and allow it to cool down fully
before cleaning.
•
Use a clean, damp cloth or a soft brush to clean the outside of the heater.
•
Never use abrasive cleaners or chemicals for cleaning that may damage the heater.
•
To protect against electrical shock and danger of life, do not immerse cord, plug or
any part of the appliance in water or any other liquid.
•
Improper repairs could lead to danger to the user.
•
Do not allow any water to enter the appliance.
•
To store the heater, place it in a clean, dry environment, ensuring it is protected
from dust.
SPECIFICATIONS
Model
PEL01219
Rated Voltage
220-240VAC
Frequency
50/60Hz
Rated Power
2000W
IP Rating
IP34
OPERATION
•
The appliance is switched on by means of a pull cord switch.
•
Pull the cord once: the heater will switch to low power setting (650W)
•
Pull the cord twice: the heater will switch to mid power setting (1350W)
•
Pull the cord three times: the heater will switch to high power setting (2000W)
•
Pull the cord for a fourth time: the heater will switch off.
•
The setting is indicated in a window in the lower section of the heater body.
4
•
Offer up the heater unit and engage with all 4 screws then slide sideways to the left
and then down to fully locate.
•
Adjust the angle of the heater. The recommended angle to a vertical mounting
surface is approx 45
o
.
•
Plug in the power source and operate the controls. Check that all functions work
correctly and the installation is safe.
