Touch Panel Commands
4-3
FP2600-T41 User Manual
4-3 Touch Interface Data
Since the FP uses an analog type touch panel, all 800 x 600 coordinates can be
detected. Resolution of the analog touch panel is 1024 x 1024, so a conversion
program to convert the coordinates to 800 x 600 becomes necessary.
Also, a calibration program to adjust the actual touch position is needed.
As a result, the following software is included with the FP2600-T41 unit.
Touch Panel Coordinate Data
(1) Resolution
Both the X and Y coordinates have a resolution of 1024.
The origin point (0,0) is located in the upper left corner of the screen.
(0,0)
(1023,1023)
OS and Touch Panel Driver Combinations
Screen display origin, with resolution
of 800 x 600, is normally at the upper
left corner of the screen. Therefore, a
software to convert the touch coordi-
nates to display coordinates is needed.
OS
Touch I/F Program
Calibration
Windows
(R)
NT
PL-TD000
Feature included in
the touch I/F program
Windows
(R)
95
PL-TD000
Feature included in
the touch I/F program
Windows
(R)
98
PL-TD000
Feature included in
the touch I/F program
Windows
(R)
2000
PL-TD000
Feature included in
the touch I/F program
Others
user programmed
user programme
