WARNING
• When connecting a power cable to the GP unit, be sure the cable has been
unplugged from the power outlet, so that you would not get an electric shock.
• High voltage runs in the GP unit, so if you take unit apart, there is a danger of
getting an electric shock. Do not take the unit apart.
• Do not use power beyond the specified voltage range. If you do, it may cause a
fire or an electric shock.
• Do not reconstruct the GP unit. It may cause a fire or an electric shock.
• Do not use the GP in an environment with flammable gas in the surrounding
atmosphere. It may cause explosion.
• GP use a lithium battery for backing up its internal clock data. If the battery is
incorrectly replaced, the battery may explode. To avoid the danger, do not
replace the battery yourself. When the battery needs a replacement, please
consult with your local GP distributor.
• Do not use touch panel switches in life-related or important disaster prevention
situations. For safety related switches, such as an emergency switch. use a
separate mechanical switch.
• Please design your system so that the machine will not malfunction by a commu-
nication fault between the GP and its host controller. If not, there could be a
danger of injuring a person or damaging materials.
To Prevent From Damage:
• Do not hit the touch panel with a hard or heavy object, or press the touch panel
with too much force, for it may cause irreparable damage.
• Do not use GP in an environment where the surrounding temperature exceeds
the specification range, for it may damage the unit.
• Please ensure that liquids or metal do not enter the GP unit, for it may cause
malfunction or a short.
• Please avoid using the unit in areas where sudden, large changes in tempera-
ture may occur. These changes can cause condensation to form inside the
unit, possibly causing an accident.
• To prevent from heat building up inside the GP, please do not install GP where its
ventilation holes may be blocked, or where heat cannot escape. Also, please
avoid using or storing the GP in an extremely hot place.
• Do not operate the GP in areas with temperatures and humidity in express of
those levels specified to prevent the GP’s touch panel from becoming warped or
bent.
• Please avoid using or storing the GP under direct sunlight or in a dusty environ-
ment.
• This unit is a delicate equipment, so please avoid using or storing the GP unit in
an environment where it can receive strong impact or vibration.
• Please avoid using or storing GP where vaporized chemicals or chemicals can
stick to it.
• Do not use paint thinner or organic solvents to clean the GP unit or display.
• Because unforeseen circumstances may befall your GP unit, be sure to back
up your screen data.
• After turning this unit OFF, be sure to wait a few seconds before turning ON
again. If the unit is started within a few seconds, it may not start up correctly.
