34
Eng
lis
h
Installation
A) Resin plate
B) Boss diameter: ø10.5 mm ± 0.5 mm (ø 0.41 in ± 0.02 in)
C) Lower hole depth: 6 mm (0.24 in) or more
D) Boss height: 20 mm (0.79 in) ± 0.1 mm (± 0 in) for the standard
mount orientation
E) Boss height and resin plate thickness*
1
):
19.5 mm (0.77 in) ± 0.1 mm (± 0 in) for the flat mount
orientation
*1 Resin plate thickness: max. 2 mm (0.08 in)
Note :
• Before you start this work, carefully read "3. Panel Cut Dimensions" (see
page 20).
• Design the resin plate on the basis of sufficient testing and within your quality
assurance range. However, the boss height cannot be changed.
• Do not construct any ribs outside of the area indicated by diagonal lines in
the figure.
%
mm
in.
10
0.39
20
0.79
10
0.39
10
0.39
5.6
0.22
10
0.39
16.5
0.65
dimension
tolerance:
±0.2 mm
(±0.01 in.)
(This figure shows PFXGP4301TADR. The dimensions are common with all
of the rear mount models.)
