1-4
PL-7900 Series User Manual
Overview
<Expansion Slot’s Width >
• Check that your expansion board’s “foot” matches the width of
the expansion slot. Slot 1 (slot 1 and 4 for PL-7900T) is 20 mm
wide, and slot 2 (slot 2 and 3 for PL-7900T) is 25 mm wide. Be
sure the width of your expansion board’s width matches that of
the intended slot.
<Power Supply>
• Since the PL does not supply -5 and -12 V current, ISA(AT)-bus
compatible boards requiring -5 or -12 V can be used only if the
optional PL-PW100 power supply is installed.
<Commercially Available Boards>
• Certain commercially available boards may not be compatible
with Digital’s PL unit. Installing incompatible boards may result
in either damage to or failure of the PL and will void your war-
ranty. Prior to using those boards, be sure to contact your local
PL distributor.
<PCI Bus>
• Within the entire range of PCI buses currently available on the
market, there may be certain devices which will not operate when
used with the PL. Prior to the use of any PCI Bus, be sure to
contact your local PL distributor.
<Main Memory>
• Be sure to use only DIM modules manufactured by Digital. Install-
ing other DIM modules may result in either damage to or failure of
the PL, and will void your warranty.
<When using Standard PC Peripheral Devices>
• Within the range of peripheral devices currently available on the
market, there may be certain devices which will not operate cor-
rectly when used with the PL. Prior to using any peripheral de-
vice, be sure to contact your local PL distributor. Installing in-
compatible boards may result in either damage to or failure of the
PL and will void your warranty.
!!!!!
Important
Summary of Contents for PL-7900 Series
Page 17: ...xvi Preface PL 7900 Series User Manual MEMO This page intentionally left blank...
Page 23: ...1 6 PL 7900 Series User Manual Overview MEMO This page intentionally left blank...
Page 81: ...PL 7900 Series User Manual OS Setup 6 4 MEMO This page intentionally left blank...
Page 99: ...App 10 PL 7900 Series User Manual Appendix MEMO...
