PS-3710A/PS-3711A Series Hardware Manual
1-10
G: PCMCIA Interface (PCMCIA)
2 ports. PCMCIA Type II, Type III can be available.
Corresponding to CARD BUS (Excluding VIDEO
ZOOM, SOUND functions)
H: Ethernet Interface (LAN1)
10BASE-T/100BASE-TX Auto Changeover. This
interface uses an RJ-45 type modular jack connector
(8 pins).
I: Ethernet Interface (LAN2)
10BASE-T/100BASE-TX/1000BASE-T Auto
Changeover. This interface uses an RJ-45 type
modular jack connector (8 pins).
J: PS/2 Keyboard Interface (KEYBOARD)
A mini DIN 6 pin (socket) is used.
K: Rear Cover
L: USB Interface (USB)
4 ports. USB 2.0 compatible.
Uses a “TYPE-A” connector.
M: Serial Interface (COM2)
RS-232C/RS-422/RS-485 Changeover, RI/+5V
Changeover. D-Sub 9-pin plug type.
N: Serial Interface (COM1)
RS-232C, RI/+5V Changeover. D-sub 9-pin plug type.
O: Speaker Output Interface (SPEAKER)
1 port. (mini pin audio jack connector)
P: RAS Interface (RAS)
D-Sub 25-pin plug type.
Q: CF Card Interface Cover
CF Card interface is under the cover. Type II-
compliant slot. IDE-type connection.
*1
CF Card
(Type I / II-compliant) is available.
R: Power Plug
S: Power Switch
PS-3711A Series AC Power Supply type only
T: Power Cover
PS-3711A Series AC Power Supply type only
Power supply voltage
5V DC ±5%
Output current
Each port:
500mA(max.),
5 ports total:
500mA(max.)
Maximum
communication distance
5m
*1
Since an IDE-type connection is used, the unit is not hot-swappable. When inserting/removing the CF
Card, be sure that power is turned OFF.
R
Q
N
P
O
M
L
Top
K
H
G
I
Left Side
J
PS-3711A Series
AC Power Supply Type Bottom
S
R
Q
N
P
O
M
L
PS-3711A Series
DC Power Supply Type Bottom
