Chapter 3 Installation and Wiring
3-21
3.2.10
Attach the PS-A unit to an Arm
To attach the PS-A unit to an Arm or to the wall, insert the attachment screws for a commercial-type arm or
wall mount adaptor into the holes in the PS-A’s rear face. (Holes specifications: VESA 75mm) For detailed
attachment instructions, please refer to that product's installation guide. The VESA Arm Attachment Hole
dimensions are signifies as follows;
Arm Attachment Screw Holes (VESA 75mm).
Attach the four (4) M4 attachment screws. (Screw length: 6mm [0.24in.] or less.) The torque required for
these screws is 0.7 to 0.8 N
•
m.
PS-3710A Rear
PS-3711A Rear
75 [2.95]
(unit: mm [in.])
75 [2.95]
75 [2.9
5]
75 [2.95]
