A-12
PS-400G Series User Manual
3 Accessories
PS Unit Accessories
General Accessories
Maintenance Accessories
*1 The CF Card is formatted using the FAT32 file system, which uses a small amount of CF
Card space. As a result, the actual amount of usable CF Card free space will be slightly less
than the CF Card capacities given here (i.e. 8, 16 or 32MB).
Product Name
Model No.
Description
Installation Fasteners
GP070-AT01
Fasteners to attach the PS-G unit to a panel
(4/set)
Installation Gasket
PS400-W900-MS
Water-resistant gasket that fits around the
PS-G unit
Backlight
PS400-BU00-MS
Replacement Backlight
Connector Cover
PS-BH00
Cover for rear-side of connector (3/set)
Data Transfer Cable
PSG-CB01
Included with PS Series Type G Application
Development Kit (ADK).
Product Name
Model No.
Description
GP077-CF20
CF Card (16 MB)
GP077-CF30
CF Card (32 MB)
CF Card Adaptor
GP077-CFAD10
CF Card adaptor for a standard PC Card slot
Pin-jack Cable
GP077-SDAD10
Pin-jack cable for sound output terminal
block.
Printer cable
PSM-PRCB00
To connect the PS-G unit to the printer.
DIO Unit
PSG-XY08
External I/O Unit providing 8 digital input and
8 digital output points.
PCMCIA Unit
PSM-PCM00
Allows use of a PCMCIA card with the PS-G
unit.
Wall Mount Adaptor
CA1-WMALRG-01 Allows the PS-G unit to be attached to a wall.
Desktop Stand
CA1-STDLRG-01
Allows the PS-G unit to be used on a
desktop or flat surface.
Rear Cover
CA1-RCVLRG-01
Attaches to the rear face of the PS-G unit.
Used together with the Wall Mount Adaptor,
Desktop Stand or Commercial-type Swing
Arm.
CF Card*1
Product Name
Model No.
Description
PS Series Screen Protection
Sheet
PS400-DF00
Five (5) disposable protection sheets for
protecting the display from dirt.
PS Series Type G Application
Development Kit (ADK)
PSG-DK01
Used to create applications for use on PS
series Type G units.
(Provide download cable)
Pro-Designer
PS-DWE01-V**
(** indicates data
that changes
depending on
the version.)
The package software used to create the
HMI Development environment
for the Multi-platform (RUN environment)
system requires purchase of the
Run-time Licence (PS-DGR01).
