1
RS-232C/485 Isolation Unit
Installation Guide
Thank you for purchasing Pro-face's RS-
232C/485 Isolation Unit (CA3-ISO232-01/
CA3-ISO485-01). This unit is designed to
utilize Pro-face product, Display(Unit) serial
interface connector (D-Sub 9-pin), and
electrically separates the serial interface
signal from the Display's chassis.
For the details of the applicable models,
please refer to each Display's Hardware
Manual or Pro-face Home Page.
http://www.pro-face.com/
Global Code
A global code is assigned to every Pro-face
product as a universal model number.
For more information on product models and
their matching global codes, please refer to
the following URL.
http://www.pro-face.com/product/globalcode.html
Safety Precautions
• When disposing of this product, be
sure to do so according to your
country
'
s standards for industrial waste
disposal.
Package Contents
(1) Isolation Unit
RS-232C Isolation Unit CA3-ISO232-01
RS-485 Isolation Unit CA3-ISO485-01
(2) Attachment Screws (2)
(3) Installation Guide <this document>
This product has been carefully packed with
special attention to quality. However, should
you find anything damaged or missing,
please contact your local distributor.
WARNING
HAZARD OF ELECTRIC SHOCK OR EXPLO-
SION
•
To avoid an electric shock, prior to connecting
this unit to the Display's serial interface, con-
firm that the Display's power supply is com-
pletely turned OFF, via a breaker, or similar
unit.
•
Do not modify this unit. Doing so may cause
a fire or an electric shock.
•
Do not use this unit in an environment where
flammable gases are present, since operat-
ing this unit may cause an explosion.
•
Do not allow water, liquids, metal or charged
particles to enter inside this unit, since they
can cause either a unit malfunction or an
electrical shock.
Failure to follow these instructions can result
in death, serious injury, or equipment damage.
WARNING
UNINTENDED EQUIPMENT OPERATION OR
LOSS OF CONTROL
•
Do not use or store this unit in direct sunlight,
in excessively dusty or dirty environments or
where excessive vibration can occur.
•
Do not store or use this unit where strong jolt-
ing can occur.
•
Do not store or use this unit where chemicals
(such as organic solvents, etc.) and acids can
evaporate, or where chemicals and acids are
present in the air.
Failure to follow these instructions can result
in death, serious injury, or equipment damage.
