200-2705
11
1.
Turn the ON/OFF switch to the OFF position (see
A
).
2.
Close the tank drain valve (see
D
). Turn in the clockwise
direction.
3.
Plug in the power cord.
High temperatures are generated
by the electric motor and the pump. To prevent burns
or other injuries, DO NOT touch the compressor while
it is running. Allow it to cool before handling or
servicing. Keep children away from the compressor
at all times.
4.
Turn the ON/OFF switch to the ON position (see
C
).
When adjusting from a higher to a
lower pressure, turn the knob counterclockwise past
the desired setting, then turn clockwise to reach the
desired pressure. Do not exceed operating pressure of
the tool or accessory being used.
5.
If a pressure regulator is present on your compressor,
adjust it to the working pressure of the tool.
1.
Turn the On/OFF switch to the OFF position (see
A
).
2.
Unplug the power cord.
3.
Reduce pressure in the tank through the outlet hose. You
can also pull the relief valve ring (see
E
) and keep it open
to relieve pressure in the tank.
Escaping air and moisture can
propel debris that may cause eye injury. Wear safety
goggles when opening drain valve.
4.
Tip the compressor (if necessary for your model) so
the drain valve is at the bottom of the tank. Then open
the drain valve to allow moisture to drain from the
tank.
WARNING:
WARNING:
CAUTION:
OPERATING INSTRUCTIONS
DAILY STARTUP
SHUTDOWN
B
OPEN
D
CLOSE
E
