11
10. Untie and discard the wire tie attached to the
Wire Harness (60).
While a second person holds the Console (33)
near the Upright (5), connect the wires on the
Console to the Wire Harness (60) and to the
Pulse Wires (34).
Insert the excess wire into the Console (33) or
the Upright (5).
Tip: Avoid pinching the wires.
Attach the
Console (33) to the Upright (5) with four M4 x
16mm Screws (93).
10
11
11. Attach the Rear Upright Cover (24) to the
Upright (5) with two M4 x 16mm Screws (93)
and an M4 x 19mm Flat Head Screw (117).
33
34
60
93
93
117
24
5
5
Avoid pinching
the wires
