24
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill information and allows you to person-
alize console settings.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be
shown:
The Time display will show the total number of hours
the treadmill has been used.
The Distance display will show the total number of
miles or kilometers that the walking belt has moved.
While the information mode is selected, press the
decrease button next to the Enter button to select
each of the following screens in the center display:
1.
UNITS:
To change the unit of measurement, press
the Enter button. To view distance in miles, select
ENGLISH. To view distance in kilometers, select
METRIC.
2.
DEMO MODE:
The console features a display
demo mode, designed to be used if the treadmill is
displayed in a store. While the demo mode is
turned on, the console will function normally when
you plug in the power cord, press the power switch
into the reset position, and insert the key into the
console. However, when you remove the key, the
displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word
ON will appear in the center display. To turn on or
turn off the demo mode, press the Enter button or
the Speed decrease button.
3.
CONTRAST LVL:
Press the Incline increase and
decrease buttons to adjust the contrast level of the
displays. Then, press the Enter button.
If a module is connected, you may also select the
following screens:
4.
MODULE:
If an iFit Live module is connected, the
display will show the word WIFI. If a USB module is
connected, the display will show the word USB/SD.
5.
AUDIO COACH:
To turn on or turn off the audio
coach, press the Enter button.
If an iFit Live module is connected, you may also
select the following screens:
6.
START MODE:
The start mode (default menu) will
appear when you insert the key into the console or
when you press the Home button. Press the Enter
button repeatedly to select the manual mode or the
iFit Live mode as the default menu.
7.
CHECK WIFI:
Press the Enter button. The center
display will show the software version number, the
network SSID, the network encryption type, the
wireless signal strength, the IP address of the mod-
ule, the number of registered users and their
names, the results of the DNS lookup, the status of
the iFit Live server, and whether the check passed.
8.
SEND/OBTAIN DATA:
To send and receive work-
outs, workout logs, and updates, press the Enter
button. When the process is finished, the words
TRANSFERS DONE will appear in the display.
To exit the information mode, remove the key from the
console.
