9
7.
See the upper drawing.
Identify the Right
Upper Body Arm (31), which is marked with a
“Right” sticker, and orient it as shown.
Have another person hold the Right Upper
Body Arm (31) near the Right Upper Body Leg
(12) while you perform the following actions:
Slide an Arm Cover (30) upward onto the Right
Upper Body Arm (31).
Locate the wire tie in the Right Upper Body Leg
(12). Tie the end of the wire tie to the right Grip
Wire (132). Carefully pull the other end of the
wire tie upward out of the Right Upper Body
Leg. Then, untie and discard the wire tie.
Tip: It
may be helpful to push the Grip Wire (132)
while pulling the wire tie.
See the lower drawing.
Insert the right Grip
Wire (132) into the right side of the Upright (6)
and pull it upward out of the top of the Upright.
Repeat this step on the other side of the
elliptical exerciser.
8.
Tip: Avoid pinching the wire.
Attach the Right
Upper Body Arm (31) to the Right Upper Body
Leg (12) with two 5/16" x 1 1/2" Button Bolts
(73) and two 5/16" Locknuts (106).
Make sure
that the Locknuts are in the hexagonal
holes.
Slide the Arm Cover (30) downward over the
Right Upper Body Leg (12).
Repeat this step to attach the Left Upper
Body Arm (7) to the Left Upper Body Leg
(97).
8
97
Hexagonal
Holes
7
31
30
12
132
132
132
31
31
12
12
Wire Tie
Pull
6
Avoid pinching
the wire
106
73
7
30
Summary of Contents for 1050 E
Page 27: ...27 NOTES...
