background image

19

HOW TO USE THE ELLIPTICAL

 HOW TO PLUG IN THE POWER CORD

This product must be grounded.

 If it should malfunc-

tion or break down, grounding provides a path of least 
resistance for electric current to reduce the risk of 
electric shock. The power cord has a plug with a 
grounding pin.

Plug the 
power cord 
into an 
appropriate 
outlet that 
is properly 
installed and 
grounded in 
accordance 
with all local 
codes and 
ordinances. The outlet must be on a nominal 120-volt 
circuit. 

A temporary 
adapter may 
be used to 
connect the 
power cord 
to a 2-pole 
receptacle 
as shown 
at the right 
if a properly 
grounded 
outlet is not 
available. 

The lug or wire extending from the adapter must 
be connected with a metal screw to a permanent 
ground such as a properly grounded outlet box cover. 

Some 2-pole receptacle outlet box covers are not 
grounded. Before using an adapter, contact a quali-
fied electrician to determine whether the outlet 
box cover is grounded before using an adapter. 
The temporary adapter should be used only until 
a properly grounded outlet can be installed by a 
qualified electrician.

    DANGER:

 

Improper connection of 

the power cord increases the risk of electric 
shock. Do not modify the plug; if it will not fit 
an outlet, have a proper outlet installed by a 
qualified electrician. If you are unsure whether 
the product is properly grounded, contact a 
qualified electrician.

Grounded Outlet

2-pole Receptacle

Grounding Pin

Adapter

Lug

Metal Screw

Summary of Contents for 1110 E PFEL10112.2









































Reviews: