background image

27

 HOW TO USE AN IFIT WORKOUT

Note: To use an iFit workout, the console must be con-
nected to a wireless network (see page 28). An iFit 
account is also required (see step 1 on page 22).

1.   Begin pedaling or press any button on the 

console to turn on the console.

 

 See HOW TO TURN ON THE POWER on 
page 21.

2.  Select the iFit mode.

 

 Press the Home button repeatedly to select the iFit 
mode. The iFit welcome message will appear in the 
display.

3.   Select a user.

 

 If more than one user is registered with your 
iFit.com membership, you can switch users in the 
iFit main screen. Press the increase and decrease 
buttons next to the Enter button to select a user.

4.  Select an iFit workout.

 

 To download an iFit workout in your schedule, 
press the Map, Train, or Lose Wt. button to down-
load the next workout of that type in your schedule. 
To download the next workout in your schedule, 
press the iFit button. 

 

 To compete in a race that you have previously 
scheduled, press the Compete button. 

 

 To re-run a recent iFit workout from your sched-
ule, first press the Track button. Next, press the 
increase and decrease buttons to select the 
desired workout. Then, press the Enter button to 
start the workout. 

 

 To use a set-a-goal workout, press the Set A Goal 
button (see page 26). 

 

 Note: Before some workouts will download, you 
must add them to your schedule on iFit.com. 

 

 For more information about the iFit workouts, 
please see www.iFit.com.

 

 When you select an iFit workout, the display will 
show the name, duration, maximum ramp incline 
level, and distance of the workout. The display will 
also show the approximate number of calories you 

will burn during the workout and a profile of the 
resistance settings of the workout.

 

 Note: The calorie goal is an estimate of the 
number of calories that you will burn during 
the workout. The actual number of calories that 
you burn will depend on various factors such 
as your weight. In addition, if you manually 
change the resistance or incline of the ramp 
during the workout, the number of calories you 
burn will be affected.

5.  Begin pedaling to start the workout.

 

See step 3 on page 25.

 

 During some workouts, the voice of a personal 
trainer will guide you through your workout.

 

 To stop the workout at any time, stop pedaling. The 
time will flash in the display. To resume the work-
out, simply resume pedaling.

6.  Follow your progress with the display. 

 

See step 4 on page 23.

 

 During a competition workout, the display can show 
your progress in the race. As you race, the top line 
in the matrix will show how much of the race you 
have completed. The other lines will show your top 
four competitors. The end of the matrix represents 
the end of the race.

7.  Measure your heart rate if desired.

 

 See step 5 on page 24.

8.  Turn on the fan if desired.

 

See step 6 on page 24.

9.   When you are finished exercising, unplug the 

power cord.

 

 

See step 7 on page 24.

For more information about iFit workouts, go to 
www.iFit.com.

IMPORTANT: To satisfy exposure compliance 
requirements, the antenna and transmitter inside 
the console must be at least 8 in. (20 cm) from all 
persons and must not be near or connected to any 
other antenna or transmitter.

Summary of Contents for 19.0 RE PFEL09812.0









































Reviews: