Pro-Form 21905.1, User Manual

6

1

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you  inish all assembly steps.

• Left parts are marked “L” or “Left” and right parts

are marked “R” or “Right.”

• In addition to the included tool(s), assembly

requires the following tool(s):

one adjustable wrench

one rubber mallet

Assembly may be easier if you have a set of 

wrenches. To avoid damaging parts, do not use 

power tools.

ASSEMBLY

2. If there are shipping tubes (not shown) attached

to the front and rear of the Frame (1), remove

and discard the shipping tubes and the hardware

attaching them.

 Orient the Front Stabilizer (4) as shown.

Attach the Front Stabilizer (4) to the Frame (1)

with two M8 x 55mm Carriage Bolts (9), two M8

Washers (3), and two M8 Flange Nuts (2).

2

2

9

3

4

1

1.

 Go to 

www.iconsupport.eu

 on your computer 

and

register your product.

•  documents your ownership
•  activates your warranty
•  ensures priority customer support if assistance

is ever needed

Note: If you do not have internet access, call 

Customer Care (see the front cover of this 

manual) and register your product.