1. With the help of a second person, carefully lay the
treadmill on its side. Position one of the Base Legs
(55) on the base of the Upright (37) as shown. Make
sure that the Base Leg Pads (31) and the Wheel
(34) are in the indicated positions. Attach the Base
Leg with two Base Leg Bolts (28), two Base Leg
Washers (68), and two Base Leg Nuts (61).
Carefully turn the treadmill onto its other side.
Assemble the other Base Leg (55) as described
above.
With the help of a second person, carefully raise the
treadmill to the upright position so the Base Legs
(55) are resting flat on the floor.
2. Hold the treadmill firmly with both hands, and lower
the treadmill to the floor.
To decrease the possibili-
ty of injury, bend your legs and keep your back
straight.
2
1
5
ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
¥
Assembly requires two people.
¥
Place all parts in a cleared area and remove the
packing materials; do not dispose of the packing
materials until assembly is completed.
¥
As you assemble the treadmill, be sure that all
parts are oriented as shown in the drawings.
The following tools (not included) are required
for assembly:
¥ Two (2) adjustable spanners
¥ One (1) phillips screwdriver
28
68
31
55
34
37
61
