16
HOW TO USE A PRESET WORKOUT
1. Insert the key into the console.
See step 1 on page 14.
2. Select one of the six preset workouts.
To select a preset work-
out, press the Weight
Loss Workouts button
or the Performance
Workouts button repeat-
edly; “P 1,” “P 2,” “P 3,”
“P 4,” “P 5,” or “P 6” will appear in the lower left dis-
play for a few seconds. The maximum speed set-
ting, maximum incline setting, and duration of the
workout will also appear in the displays. In addition,
a profile of the speed settings of the workout will
scroll across the display.
Each workout is divided into one-minute segments.
One speed setting and one incline setting are pro-
grammed for each segment. Note: The same
speed and incline settings may be programmed for
consecutive segments.
3. Start the walking belt.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings for the workout.
Hold the handrails and begin walking.
During the workout, the
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
The height of the flash-
ing segment indicates the speed setting for the cur-
rent segment. At the end of each segment, a series
of tones will sound and the next segment of the
profile will begin to flash. If a different speed or in-
cline setting is programmed for the next segment,
the speed or incline setting will flash in the display
to alert you and the speed or incline will automati-
cally adjust to the speed and incline settings for the
next segment.
The workout will continue in this way until the last
segment of the profile flashes in the display and the
last segment ends. The walking belt will then slow
to a stop.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the Speed or
Incline buttons;
however, when the next segment
of the workout begins, the treadmill will auto-
matically adjust to the speed and incline set-
tings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 2 Km/H. When the next seg-
ment of the workout begins, the treadmill will auto-
matically adjust to the speed and incline settings
for the next segment.
4. Change the incline of the treadmill as desired.
See step 4 on page 14.
5. Follow your progress with the track and the
displays.
See step 5 on page 15.
6. Measure your heart rate if desired.
See step 6 on page 15.
7. Turn on the fan if desired.
See step 7 on page 15.
8. When you are finished exercising, remove the
key from the console.
See step 8 on page 15.
Current Segment
