8
5
5. The Console (4) can use four 1.5V D batteries
(not included); alkaline batteries are recom-
mended.
IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the screw, remove the
battery cover, insert the batteries into the bat-
tery compartments, and reattach the battery
cover.
Make sure to orient the batteries as
shown by the diagrams inside the battery
compartments.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the cover of
this manual. To avoid damaging the console,
use only a manufacturer-supplied AC
adapter.
Plug one end of the AC adapter into
the jack on the console; plug the other end into
an outlet installed in accordance with all local
codes and ordinances.
6. While another person holds the Console (4)
near the Upright (2), connect the console wire
harnesses to the Game/Pulse and Main Wire
Harnesses (42, 43);
make sure to connect the
console wire that has a tag to the game wire
that has a tag.
Insert the excess wire down-
ward into the Upright.
Tip: Do not pinch the Wire Harnesses (42,
43).
Attach the Console (4) to the Upright (2)
with four M4 x 16mm Flange Screws (80).
2
6
4
80
42
Console Wire
Harnesses
80
Avoid pinching
the wires
43
Battery
Cover
Batteries
Screw
Batteries
4
