background image

10

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, unplug the power cord.
CAUTION: You must be able to safely lift 45 pounds (20
kg) in order to raise, lower, or move the treadmill. 

1.  Hold the treadmill with your hands in the locations shown

at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. 
Raise the treadmill about halfway to the
vertical position. 

2. Move your right hand to the position shown and hold the

treadmill firmly. Press out on the storage latch. Raise the
treadmill until the storage latch closes over the catch.
Make sure that the storage latch is fully engaged
over the catch. 

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of 
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° Fahrenheit.

Storage 

Latch

Catch

Engaged

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the stor-
age latch is closed fully over the catch. 

1.  Hold the upper ends of the handrails. Place one foot on

the base as shown.

2.  Tilt the treadmill back until it rolls freely on the front

wheels. Carefully move the treadmill to the desired loca-
tion. To reduce the risk of injury, use extreme caution
while moving the treadmill. Do not move the treadmill
over an uneven surface.

3.  Place one foot on the base, and carefully lower the tread-

mill until it is resting in the storage position.

Base

Front Wheels

All manuals and user guides at all-guides.com

Summary of Contents for 485 Pi




















Reviews: