11
6
27
Avoid pinching the
Main Wire Harness (25)
25
29
7
6.
Tip: Avoid pinching the Main Wire Harness
(25).
Orient the Upright (27) as shown, and hold
it on the Frame (50).
Attach the Upright (27) with four M8 x 20mm
Screws (29);
start all the Screws, and then
tighten them.
7. Locate the lower end of the wire tie in the Upright
(27). Tie the wire tie to the Main Wire Harness
(25). Then, pull the upper end of the wire tie until
the Main Wire Harness is routed through the
Upright and out of the indicated hole.
Tip: To prevent the Main Wire Harness (25)
from falling into the Upright (27), secure the
Main Wire Harness with the wire tie.
27
25
Wire
Tie
Wire
Tie
50
Hole
Summary of Contents for 525 CSX PFEX62715.0
Page 4: ...4...
