14
7
7
iFit
Port
3
4
2
65
1
12
12. Slide the Console Cover (3) upward to the
Handlebar (4). Attach the Console Cover to
the Handlebar and to the Console (7) with two
M4 x 16mm Screws (2).
13.
IMPORTANT: If you purchased the optional
iFit module, insert the iFit module into the iFit
port on the Console (7) before you attach the
Tablet Holder (1). After the exercise bike is
assembled, follow the instructions included
with the iFit module.
Attach the Tablet Holder (1) to the Console (7)
with four #8 x 5/8" Screws (65);
start all the
Screws, and then tighten them.
13
60
14
14. Identify the Right Pedal (60).
Using an adjustable wrench,
firmly tighten
the
Right Pedal (60)
clockwise
into the Right Crank
Arm (59).
Firmly tighten the Left Pedal (not shown)
counterclockwise into the Left Crank Arm
(not shown). IMPORTANT: You must turn the
Left Pedal counterclockwise to attach it.
Adjust the strap on the Right Pedal (60) to the
desired position, and press the ends of the strap
onto the tabs on the Right Pedal.
Adjust the
strap on the Left Pedal (not shown) in the
same way.
Tab
Strap
59
Summary of Contents for 525 CSX PFEX62715.0
Page 4: ...4...
