Pro-Form 525 CSX PFEX62715.0, User Manual

26

 HOW TO CHANGE CONSOLE SETTINGS

1.  Select the settings mode.

   To select the settings mode, press the gear button. 

   The display will show the total number of hours 

that the exercise bike has been used and the total 

distance (in miles or kilometers) that has been 

pedaled on the exercise bike.

   If an iFit module is connected to the console, the 

display will show the words WIFI MODULE or USB 

MODULE. 

   If no module is connected, the display will show 

the words NO IFIT MODULE. If no module is con-

nected, some of the settings options will not be 

available.

2.  Navigate the settings mode.

   While the settings mode is selected, the matrix of 

the display will display several optional screens. 

Press the decrease button next to the Enter button 

repeatedly to select the desired optional screen.

   The lower section of the display will show instruc-

tions for the selected optional screen. 

Make sure 

to follow the instructions shown in the lower 

part of the display.

 3.  Change settings as desired.

Demo

—The console features a display demo 

mode, designed to be used if the exercise bike is 

displayed in a store. Press the Enter button repeat-

edly to turn the demo mode ON or OFF.

Units

—The currently selected unit of measurement 

will appear in the display. To change the unit of 

measurement, press the Enter button repeatedly. 

To view distance in miles, select ENGLISH. To view 

distance in kilometers, select METRIC.

Contrast Level

—The currently selected contrast 

level will appear in the display. Press the Quick 

Resistance increase and decrease buttons to 

adjust the contrast level. 

Trainer Voice

—The currently selected setting for 

the audio coach will appear in the display. Press 

the Enter button repeatedly to turn the audio coach 

ON or OFF.

   Default Menu

—The default menu will appear when 

you press the Home button. Press the Enter button 

repeatedly to select the manual mode or the iFit 

menu as the default menu.

Check Status

—The words CHECK WIFI STATUS 

or CHECK USB STATUS will appear in the display. 

Press the Enter button. After a few seconds, the 

status of the iFit module will appear in the display. 

To exit this display, press the gear button.

Send/Receive

—The words SEND/RECEIVE DATA 

will appear in the display. Press the Enter button. 

The console will then check for iFit workouts and 

firmware downloads.

4.  Exit the settings mode.

   Press the gear button to exit the settings mode.