12
11
11. Insert the wires into the Right Handrail (64)
through the indicated hole as you set the con-
sole assembly on the Uprights (66, 76).
Make
sure that no wires are pinched.
Attach the console assembly with ten #8 x 3/4"
Screws (4).
Start all ten Screws, and then
tighten them. Do not overtighten the Screws.
See step 5.
Firmly tighten the six 3/8" x 3 1/4"
Screws (2).
4
4
4
4
4
64
Wires
Wires
76
Hole
66
Console Assembly
10. With the help of a second person, hold the con-
sole assembly near the Right Handrail (64).
See the inset drawing.
Connect the Upright
Wire (63) to the console wire.
The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, remove the wire tie from
the Upright Wire.
Connect the console wire to the ground wire on
the Console Crossbar (61).
64
10
63
61
Ground
Wires
Console
Assembly
Console
Wire
63
Wire
Tie
Console
Wire
Summary of Contents for 530 ZLT PETL59814.0
Page 27: ...27 NOTES...
