10
9
9. Using a small plastic bag to keep your fingers
clean, apply a generous amount of the included
grease to the axle on the right side of the
Upright (2).
Slide the Right Upper Body Arm (9) onto the
Upright (2).
Attach the Right Upper Body Arm (9) with an M8
x 20mm Screw (79) and an M8 Washer (33).
Repeat this step on the other side of the
elliptical.
9
33
79
8
2
Grease
31
76
6
80
32
55
49
Grease
10
10. Apply a small amount of grease to a Pivot
Axle (31).
Insert the Pivot Axle (31) through the Right Pedal
Arm (49) and the right Upper Body Leg (6) from
the direction shown.
Finger tighten an M6 x 18mm Screw (80), a Pivot
Cover (32), and an M6 x 18mm Washer (55) into
the indicated end of the Pivot Axle (31).
Then, tighten both M6 x 18mm Screws (80) in
the Pivot Axle (31)
at the same time.
Repeat this step on the other side of the
elliptical.
See step 8.
Tighten the M8 x 35mm Bolts (76).
80
