6
1
70
1
1
78
47
78
2
73
• To hire an authorized service technician to
assemble the elliptical, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you
nish assembly.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one rubber mallet
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
1. With the help of a second person, place some of
the packing materials (not shown) under the rear
of the Frame (1).
Have the second person hold
the Frame to prevent it from tipping while you
complete this step.
Tighten a Leveling Foot (47) into the underside
of the Frame (1).
Identify the Rear Stabilizer (70), which does not
have wheels, and orient it as indicated by the
sticker.
Attach the Rear Stabilizer (70) to the Frame (1)
with two M10 x 93mm Screws (78).
Remove the packing materials from under the
rear of the Frame (1).
2. With the help of a second person, place some
of the packing materials (not shown) under the
front of the Frame (1).
Have the second per-
son hold the Frame to prevent it from tipping
while you complete this step.
Orient the Front Stabilizer (73) as indicated by
the sticker.
Attach the Front Stabilizer (73) to the Frame (1)
with two M10 x 93mm Screws (78).
Remove the packing materials from under the
front of the Frame (1).
