18
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the con-
sole. Locate the audio cable and plug one end into the
MP3 jack on the console. Plug the other end into a
jack on your MP3 player, CD player, or other personal
audio player.
Make sure that the audio cable is fully
plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume by pressing the Volume (VOL) buttons on the
console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur-
face instead of on the console.
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information and allows you to
select a unit of measurement for the console. You can
also turn on or turn off the demo mode.
To select the information mode, insert the key into the
console while holding down the Stop button. Then, re-
lease the Stop button. When the information mode is
selected, the following information will be shown:
The left display will show the
total number of hours that
the treadmill has been used.
The right display will show
the total number of kilome-
ters or miles that the walking
belt has moved.
Press the Stop button again to view the following infor-
mation:
An “M” for metric kilometers
or an “E” for English miles will
appear in the right display.
Press the Speed increase
button to change the unit of
measurement, if desired.
The console features a dis-
play demo mode, designed
to be used if the treadmill is
displayed in a store. While
the demo mode is turned on,
the console will function nor-
mally when you plug in the power cord, switch the
reset/off circuit breaker to the reset position, and insert
the key into the console. However, when you remove
the key, the displays will remain lit, although the but-
tons will not function. If the demo mode is turned on, a
“d” will appear in the left display while the information
mode is selected. To turn on or turn off the demo mode,
press the Speed decrease button.
To exit the information mode, remove the key from the
console.
